Home > Sheet and Plates > Stainless Steel 410S Sheet and Plates
Headquartered in Bangkok, Thailand, Chanchai Stainless is a reliable stainless steel manufacturer and supplier of high-quality stainless steel with strong and versatile solutions for various industries. Some of our key products include Stainless Steel 410S Sheets and Plates, which are well known for their superior resistance to corrosion, high strength, and versatility in a variety of applications. Engineered for long performance, the sheets and plates provide durability in harsh architectural and industrial environments. At Chanchai Stainless, customer satisfaction is our priority through guaranteed consistent quality, on-time delivery, and customized products to suit specific project needs, making us a trustworthy partner in stainless steel solutions.
410S Stainless Steel is a martensitic low-carbon grade that offers strength alongside higher corrosion resistance. It has 11.5–13.5% Chromium and up to 0.08% Carbon in its makeup, showing high mechanical properties while minimizing susceptibility to corrosion. The grade offers enhanced weldability, oxidation resistance, and good toughness in applications at high temperatures. Heat treatment increases its mechanical strength and durability further. Its combination of hardness, corrosion resistance, and machinability ensures that Stainless Steel 410S provides good performance, which is suitable for industrial use, where reliability and stability under fluctuating environmental and thermal conditions are demanded.
Standard : ASTM / ASME A240 / SA240
Size : 1000 mm x 2000 mm, 1220 mm x 2440 mm, 1500 mm x 3000 mm, 2000 mm x 2000 mm, 2000 mm x 4000 mm
Thickness : 0.1mm to 12 mm Thk
Form : Coils, Foils, Rolls, Plain Sheet, Shim Sheet, Strip, Flats, Blank (Circle), Ring (Flange)
Finish : Hot rolled plate (HR), Cold rolled sheet (CR), 2B, 2D, BA NO(8), SATIN (Met with Plastic Coated)
Hardness : Soft, Hard, Half Hard, Quarter Hard, Spring Hard etc.
| Element | SS 410S |
| C | 0.08 max |
| Mn | 1 max |
| Si | 1 max |
| P | 0.040 max |
| S | 0.030 max |
| Cr | 11.5 – 13.5 |
| Fe | 85 |
| Element | SS 410S |
| Density | 7.8 g/cm3 |
| Tensile Strength | psi – 64,400, MPa – 444 |
| Yield Strength (0.2%Offset) | psi – 42,000, MPa – 290 |
| Elongation | 33 % |
| Hardness | Rockwell B (HR B)- 75 / Brinell (HB)- 65 |
Contact us to get a quick quote for your requirement.
Stainless Steel 410S hot rolled sheets possess excellent corrosion resistance with high strength and toughness. The sheets come in a wide range of thicknesses, starting from 1.5 mm up to 20 mm with widths up to 2000 mm. These are suitable for high-impact resistant applications.
Stainless Steel 410S Cold Rolled Plates have corrosion resistance along with a smooth, bright surface finish. Usually made available in width up to 1500mm and in different thickness ranges such as 0.5-6 mm these plates are specially suited for use in precision engineering and for critical applications where closer tolerances apply.
Stainless Steel 410S Chequered Sheets have a raised pattern, which gives excellent corrosion and slip resistance. These sheets are available in various thicknesses from 1.2 mm to 6 mm and up to 2000 mm x 1000 mm dimensions, which make them suitable for flooring and decorative applications.
Stainless Steel 410S Perforated Plates combine protection against corrosion with increased ventilation and aesthetics. The perforated plates are available in a number of hole sizes and patterns, available in thicknesses ranging from 1 mm up to 4 mm and available in dimensions up to 2500 mm × 1200 mm for filters and screens.
The Shim Sheets of Stainless Steel 410S are available with corrosion resistance and precise control over thickness. These sheets are available in 0.1 mm thickness up to 1000 mm x 1000 mm, cut to size for fine-tuning mechanical fits.
Stainless Steel 410S polished plates offer outstanding corrosion resistance and have a highly reflective finish. The plates are usually available in sizes up to 2000 mm x 1000 mm with thickness between 1mm and 6mm. Stainless Steel 410S Polished Plates are used in aesthetic applications as well as in decorative purposes.
Chanchai Stainless guarantees a high customer experience by completing all the necessary documentation of high-quality Stainless Steel 410S Sheets and Plates. We will provide our customer with commercial invoices, packing list, fumigation certificate, heat treatment chart, quality assurance plan, and lab test reports certified by NABL-approved labs to prove authenticity and superior quality in our products that can give complete trust and satisfaction to our respected customers. Additionally, our Stainless Steel 410S Sheets and Plates are supplied with test certificates such as MTC as per EN 10204/3.1b, PMI Test Certificate, a 100% radiography test report, and Third Party Inspection Certificate. These certificates reflect our customer-focused approach and our very strong commitment to product excellence.
Stainless Steel 410S Sheets and Plates find extensive applications across sectors for their strength, durability, and resistance to corrosion. In automobiles, they are utilized in exhaust systems, cladding, and structural components owing to their resistance to heat and oxidation. Aerospace uses appreciate their toughness and reliability in high-stress components. Construction sectors utilize them in architectural and infrastructure projects with the need for long-term performance. In addition, 410S is appropriate for applications in marine environments, food processing machinery, and chemical processing equipment where weldability and corrosion resistance are essential. Its adaptability makes it the material of choice in demanding industrial processes.
©2024 Chanchai Stainless All Rights Reserved.
